top of page

Passeggiate nel Borgo Medievale di Termoli

Pubblico·13 membri

Catia V5 Crack File 27 WORK


The measurement of instantaneous angular speed is being increasingly investigated for its use in a wide range of condition monitoring and prognostic applications. Central to many measurement techniques are incremental shaft encoders recording the arrival times of shaft angular increments. The conventional approach to processing these signals assumes that the angular increments are equidistant. This assumption is generally incorrect when working with toothed wheels and especially zebra tape encoders and has been shown to introduce errors in the estimated shaft speed. There are some proposed methods in the literature that aim to compensate for this geometric irregularity. Some of the methods require the shaft speed to be perfectly constant for calibration, something rarely achieved in practice. Other methods assume the shaft speed to be nearly constant with minor deviations. Therefore existing methods cannot calibrate the entire shaft encoder geometry for arbitrary shaft speeds. The present article presents a method to calculate the shaft encoder geometry for arbitrary shaft speed profiles. The method uses Bayesian linear regression to calculate the encoder increment distances. The method is derived and then tested against simulated and laboratory experiments. The results indicate that the proposed method is capable of accurately determining the shaft encoder geometry for any shaft speed profile.




catia v5 crack file 27



... Applicants 2.66 Revival of abandoned applications. (a) The applicant may file a petition to revive an... for filing a petition to revive an application abandoned because the applicant did not timely respond... proposed response. (c) The requirements for filing a petition to revive an application abandoned because...


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 303 (Sub-No. 39X)] Wisconsin Central Ltd.--Abandonment Exemption--in Manitowoc County, WI Wisconsin Central Ltd. (WCL) has filed a verified notice of exemption under 49 CFR part 1152 subpart F--Exempt Abandonments to abandon 6...


This paper presents the characteristics of the process of longitudinal rolling of shafts and the geometry of the working section of forming rollers with a secant profile. In addition, the analytical formulae defining the geometry of a roller profile were determined. The experiments were carried out on shafts made of S235JR and C45 structural steels and the MSC.Marc + Mentat program was used for the numerical analysis of the rolling process based on the finite element method. The paper analyses the effect of roller geometry on the changes in value of the widening coefficient and the diameter reduction coefficient for the first forming passage. It was found that the mechanical properties of the shaft material have a slight influence on the widening coefficient. The value of the widening coefficient of the shaft increases with increase in the initial diameter of the shaft. Increasing shaft diameter causes an increase of strain gradient on the cross-section of the shaft.


Due to difficulty and radiation exposure associated with examination of the internals of large commercial nuclear reactor coolant pumps, it is necessary to be able to diagnose the cause of an excessive vibration problem quickly without resorting to extensive trial and error efforts. Consequently, it is necessary to make maximum use of all available data to develop a consistent theory which locates the problem area in the machine. This type of approach was taken at Three Mile Island, Unit #1, in February 1984 to identify and locate the cause of a continuously climbing vibration level of the pump shaft. The data gathered necessitated some in-depth knowledge of the pump internals to provide proper interpretation and avoid misleading conclusions. Therefore, the raw data included more than just the vibration characteristics. Pertinent details of the data gathered is shown and is necessary and sufficient to show that the cause of the observed vibration problem could logically only be a cracked pump shaft in the shaft overhang below the pump bearing.


The Approximate Entropy is a statistical calculus used primarily in the fields of Medicine, Biology, and Telecommunication for classifying and identifying complex signal data. In this work, an Approximate Entropy algorithm is used to detect cracks in a rotating shaft. The signals of the cracked shaft are obtained from numerical simulations of a de Laval rotor with breathing cracks modelled by the Fracture Mechanics. In this case, one analysed the vertical displacements of the rotor during run-up transients. The results show the feasibility of detecting cracks from 5% depth, irrespective of the unbalance of the rotating system and crack orientation in the shaft. The results also show that the algorithm can differentiate the occurrence of crack only, misalignment only, and crack + misalignment in the system. However, the algorithm is sensitive to intrinsic parameters p (number of data points in a sample vector) and f (fraction of the standard deviation that defines the minimum distance between two sample vectors), and good results are only obtained by appropriately choosing their values according to the sampling rate of the signal.


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 33 (Sub-No. 293X)] Union Pacific Railroad Company--Abandonment Exemption--In Wright County, IA Union Pacific Railroad Company (UP) filed a verified notice of exemption under 49 CFR 1152 subpart F--Exempt Abandonments to abandon a line...


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 33 (Sub-No. 289X)] Union Pacific Railroad Company--Abandonment Exemption--in Pulaski County, AR Union Pacific Railroad Company (UP) filed a verified notice of exemption under 49 CFR part 1152 subpart F-Exempt Abandonments to abandon a 4...


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 290 (Sub-No. 339X)] Norfolk Southern Railway Company--Abandonment Exemption--in Gaston County, NC Norfolk Southern Railway Company (NSR) has filed a verified notice of exemption under 49 CFR part 1152 subpart F-Exempt Abandonments to abandon approximately 0.5 miles of rail...


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 303 (Sub-No. 38X)] Wisconsin Central Ltd.--Abandonment Exemption--in Fond Du Lac County, WI Wisconsin Central Ltd. (WCL) \\1\\ filed a verified notice of exemption under 49 CFR pt. 1152 subpart F--Exempt Abandonments to abandon...


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 303 (Sub-No. 37X)] Wisconsin Central, Ltd.--Abandonment Exemption--in Marathon County, WI Wisconsin Central, Ltd. (WCL), filed... to abandon 1.14 miles of rail line between mileposts 17.50 and 18.64, in Weston, Marathon County, Wis...


Considerable weight benefits and the option to combine various steel alloys of the single parts are the major advantages of assembled over conventional camshafts. The Presta joining process is the leading manufacturing method of assembled camshafts in the global market. The process is divided into two substeps. At first, the outer diameter of the shaft is widened with a profile oriented orthogonal to the shaft axis at the intended cam seat. At this position the shaft is subsequently joined with a cam with an internal profile oriented parallel to the shaft axis. As a result, these perpendicular profiles form a tight fit due to plastic deformations. Consequently the simulation of the manufacturing process has to start with the simulation of the rolling of the shaft. The resulting profile requested in this step is axisymmetric, but the arrangement of tools is not. Thus a three-dimensional model is required, which is presented in this work. Furthermore, the infeed of the rolling tool is unknown and controlled by the stiffness of the holders of the rolling tool. This work shows the modeling of this behavior. To predict realistic results for the underlying process, the use of precise material models is essential in order to take several hardening mechanisms into account. However, the use of complex material models implies additional effort, which is shown in this work.


... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 303 (Sub-No. 40X)] Wisconsin Central Ltd.--Abandonment Exemption--in Kaukauna, Outagamie County, WI Wisconsin Central Ltd. (WCL) has filed a verified notice of exemption under 49 CFR pt. 1152 subpart F-Exempt Abandonments to...


Due to the fast depletion of fossil fuels and its negative impact on the environment, more attention has been concentrated to find new resources, policies and technologies, which meet the global needs with regard to fuel sustainability and emissions. In this paper, as a step to study the effect of burning low calorific value fuels on gas-turbine performance; a 50 kW slightly pressurized non-premixed tubular combustor along with turbocharger based twin shaft micro gas-turbine was designed and fabricated. A series of tests were conducted to characterize the system using LPG fuel. The tests include the analysis of the temperature profile, pressure and combustor efficiency as well as air fuel ratio and speed of the second turbine. The tests showed a stable operation with acceptable efficiency, air fuel ratio, and temperature gradient for the single and twin shaft turbines.


A six-degree-of-freedom nonlinear semi-definite model with time varying mesh stiffness has been developed for the dynamic analysis of spur gears. The model includes a spur gear pair, two shafts, two inertias representing load and prime mover, and bearings. As the shaft and bearing dynamics have also been considered in the model, the effect of lateral-torsional vibration coupling on the dynamics of gears can be studied. In the nonlinear model developed several factors such as time varying mesh stiffness and damping, separation of teeth, backlash, single- and double-sided impacts, various gear errors and profile modifications have been considered. The dynamic response to internal excitation has been calculated by using the 'static transmission error method' developed. The software prepared (DYTEM) employs the digital simulation technique for the solution, and is capable of calculating dynamic tooth and mesh forces, dynamic factors for pinion and gear, dynamic transmission error, dynamic bearing forces and torsions of shafts. Numerical examples are given in order to demonstrate the effect of shaft and bearing dynamics on gear dynamics.


Info

Benvenuto/a nel gruppo! Puoi connetterti ad altri iscritti, ...
bottom of page